Dover markem-image SmartDate X65 User Manual

Printer conguration
65 10099206-AA
Tools > Settings > Printer > Machine Setup > Machine >
Image Adjust
Machine
Abort On Stop
Prompt For Allocation
Database
Default Allocation
Discard Print Time (sec)
Disabled
Disabled
No
Local
0
20
 MI Sigma Monitoring
When enabled, this feature allows the Smartdate to collect and present monitoring data about
the reasons for non-productive time. If printing does not occur within a dened time period,
a fault is generated. A reason for the stoppage must be provided before the printer can be
switched back into a producing state.
To enable the feature.
Tools > Settings > Printer > Machine Setup > Machine
Prompt For Ribbon
Machine
Yes
Enabled
0
2
MI Sigma Monitoring
MI Sigma Period
Feature Lock Code
Enable ‘MI Sigma Monitoring’ and enter the number of minutes for which the monitoring is to
occur into the ‘MI Sigma Period’ setting. Press and then to return to the ‘Home’ screen,
followed by to begin production.

Dover markem-image SmartDate X65 Specifications

General

Brand	Dover
Model	markem-image SmartDate X65
Category	Printer
Language	English