Printer conguration
50 10099206-AA
Batch Unexpected
The number of print-go signals with the current job selected that
were ignored as they occurred in an unexpected time
Batch Low Speed
Number of prints with the current job selected that were completed
using the ‘Low Speed Print’ feature
Batch Discarded
Number of prints with the current job selected that were not
completed
Batch Verication
Number of prints with the current job selected that could not be
veried
Prints Remaining Estimate number of prints remaining on the current ink ribbon
Replace In
Estimated time when the current ink ribbon is expected to require
replacing
Instant Average Pack Rate The pack rate measured over xx
Long Term Average Pack Rate The pack rate measured over yy
Current Substrate Speed
Depending on conguration, the substrate speed measured by the
encoder, or the ‘xed speed’ setting
Controller Temperature The temperature of the controller
Printer Temperature The temperature of the printer
Printhead Temperature The temperature of the printhead
Printing Time The time taken for printing during the print cycle
Print Cycle Time The time taken by the complete print cycle
Daily Availability
A measurement of how long the SmartDate has been ready and able
to operate but was not in use
When complete, return to the home page and verify the changes to the information panel.
15/10/2020
Start
96 %
Tools
O
Select Job
Adjust
11:56
Administrator
default job
Idle
Use By
19th May 2022
Packed in UK
Total Print Count
Printer Temperature
Batch Print Count
Printhead Temperature
Prints Remaining
1084
33.30
112040
15110
46.8
To Next Page
Loading...
Need help?
General