Dräger Atlan A350 - Page 35

Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n 35
Overview
– VC - SIMV / AutoFlow
– VC - SIMV / PS / AutoFlow
For a detailed description of the ventilation modes and the additional settings, see
page 298.
3.2.5 Additional operation modes
– External fresh-gas outlet
– Pause
–CBM mode
3.2.6 Monitoring
The device can monitor the following:
– Airway pressure
– Minute volume
– Inspiratory O
2 concentration
– Inspiratory and expiratory anesthetic gas concentrations (only available with the
integrated patient-gas measurement module)
– Inspiratory and expiratory CO
2 concentrations (only available with the integrated
patient-gas measurement module)
– Inspiratory and expiratory N
2O concentrations (only available with the integrated
patient-gas measurement module)
– Apnea (pressure, flow, and CO
2)
– Occurrence of anesthetic gas mixtures (only available with the integrated
patient-gas measurement module)
– Lack of fresh gas in the breathing system and the breathing circuit
3.2.7 Display on the screen
The device can display the following information on the integrated screen:
– Waveforms
– Graphical trends
– Numeric trends
– Loops
– Alarm logbook
– Logbook
– Numeric parameters
– Econometer
3.2.8 Logbook
The device can capture and store the following data, among other things:
– Measured values
– Set values and related changes
– Patient data
– Ventilation modes