Trends
VF4 Infinity Gamma Series Page 6-9
Technical Code Condition
– – – Lower measuring range exceeded
(IBP, ST)
+++ Upper measuring range exceeded
(HR, ST, IBP, PLS, etCO
2
, RRc, Rsp, Multigas)
*A* Artifact (ECG, Rsp); Multigas Data Invalid
*C* Blocked Line, Cuff Leak, Open Line, Overpres-
sure (NBP)
*F* Fault (SpO
2
, PLS, NBP, Multigas)
*L* Lead Off (ECG, Rsp, ST)
*M* Failure to measure (NBP)
ISO and ST measuring points changed
*O* No pulsations (NBP)
*U* Unplugged cable; loss of communication
*X* Measurement time-out (NBP)
LRN Learning (Rsp, ARR)
ON Power up, patient admit, exit from Standby
STB Standby
TST System test
blank No value (Respiration monitoring off, NBP
between measurements, ST monitoring off, T
over or under measurement range)
To Next Page
Loading...
