Recordings
VF4 Infinity Gamma Series Page 7-3
Recorder Preparation
Connect the R50 Series recorder to the interface plate at the back
of the monitor or to the Infinity Docking Station, if available.
CAUTION: Always place recorders and laser printers on a flat
and stable surface to prevent them from falling.
NOTES:
! The configuration/installation of a network laser printer is a
Service function.
! The function of the R50 recorder key Alternate Speed or
mm/s is not supported by the Gamma Series monitor.
R50 Recorder Connection
R50 Recorder Connection
To Next Page
Loading...
