Page 15-12 Infinity Gamma Series VF4
NPB Alarms
Turn NBP alarms on or off and set alarm limits on the Alarm
Limits table (see the chapter Alarms and Messages). If alarms are
on, the monitor alarms for limit violations as well as patient
movements, improper placement of the cuff and overpressure
conditions.
NOTE: When an NBP alarm occurs, the monitor alerts you once
and, when the alarm is acknowledged by pressing the Alarm
Silence or the All Alarms Off key, will not alert you again of the
same alarm even though displayed values may remain out of limits.
You can set the systolic, mean, and diastolic alarm limits within
the following range:
! 1 to 250 mmHg, in increments of 1 mmHg.
To Next Page
Loading...
