Page 9-8 Infinity Gamma Series VF4
STEPS: Relearning the Patient’s ECG
1. Make sure that the ECG leads are properly connected and
that the ECG displayed seems normal for this patient.
2. Click on the
HR parameter box.
3. Click on
More....
4. Click on
Relearn.
NOTE: You cannot initiate a relearning, if arrhythmia monitoring
is turned off.
During the learning phase, LRN appears in the HR parameter box
and the message Arrhythmia Relearning in the message area at
the bottom of the screen. Once learning is complete, date and
time of the learning phase are displayed in the HR Setup menu
next to the Relearn selection.
To Next Page
Loading...
