Non-Invasive Blood Pressure
VF4 Infinity Gamma Series Page 15-9
STEPS: Selecting the Inflation Mode
1. Click on the NBP parameter box.
2. Click on
Inflation Mode.
3. Select the desired inflation mode and click the knob.
WARNIN G: In neonatal monitoring mode, a blood pres-
sure higher than the inflation range may activate the
“NBP Cannot Measure”, “NBP No Pulsation”, or “NBP
Mean Only” alarms. If this happens, manually check the
patient’s pressure and, if appropriate, select the Neo 140
inflation mode or switch to a Pediatric inflation mode.
To Next Page
Loading...
