VF4 Infinity Gamma Series Page v
!
Occasionally, the ECG waveform is not displayed in the second waveform
channel, when you assign SpO
2
to the first waveform channel. In this case,
click on the second waveform channel and select the desired ECG lead
again.
! When admitting a patient at the MULTIVIEW WORKSTATION, the monitor
does not store the admit date, if it is the current date. In this case, you must
enter the admit date via the monitor’s Patient Admit menu.
! When the values of an anesthetic agent exceed the measuring range, the
monitor displays +++ in the agent parameter box and cycles two out-of-
range error messages, one correctly identifying the agent with out-of-
range values, the other showing a previously monitored agent.
To Next Page
Loading...
