Dräger Polytron 8000 Series Technical Manual

8 Technical Manual | Dräger Polytron
®
8000 Series
Introduction
1 Introduction
This document is a supplement to the instructions for use for the following gas
detectors:
– Polytron
®
8100 EC
– Polytron
®
8200 CAT
– Polytron
®
8310 IR
– Polytron
®
87x0 IR
– Polytron
®
8700 IR
– Polytron
®
8720 IR
1.1 Target group
This manual is intended for experts who are specialized in plant design, certified
electricians, or persons instructed by certified electricians who are also familiar with
the applicable standards.

Dräger Polytron 8000 Series Specifications

General

Ingress Protection	IP66/67
Detection Principle	Electrochemical, Infrared, Catalytic Bead
Gases Detected	Combustible gases, toxic gases, and oxygen
Display	LCD with backlight
Humidity Range	0 to 99% RH (non-condensing)
Housing Material	Stainless steel
Output Signal	4-20 mA, HART, RS-485 Modbus
Power Supply	10 to 30 V DC
Certifications	ATEX, IECEx, CSA
Temperature Range	-40 °C to +65 °C (depending on sensor)