Dräger Polytron 8000 Series Technical Manual

88 Technical Manual | Dräger Polytron
®
8000 Series
Disposal
16 Disposal
Disposal of electrochemical sensors
WARNING
Danger of explosions and risk of chemical burns!
Sensor fluids may leak out and can cause acid burns.
 Do not dispose sensors in fire
 Do not open with force
This product must not be disposed of as household waste. This is indicated
by the adjacent icon.
You can return this product to Dräger free of charge. For information please
contact the national marketing organisations and Dräger.

Dräger Polytron 8000 Series Specifications

General

Ingress Protection	IP66/67
Detection Principle	Electrochemical, Infrared, Catalytic Bead
Gases Detected	Combustible gases, toxic gases, and oxygen
Display	LCD with backlight
Humidity Range	0 to 99% RH (non-condensing)
Housing Material	Stainless steel
Output Signal	4-20 mA, HART, RS-485 Modbus
Power Supply	10 to 30 V DC
Certifications	ATEX, IECEx, CSA
Temperature Range	-40 °C to +65 °C (depending on sensor)