Vigor2860 Series User’s Guide
128
LAN will have different LAN configuration page. Each
LAN must be configured in different subnet.
IPv6 – Click it to access into the settings page of IPv6.
Advanced
DHCP packets can be processed by adding option number
and data information when such function is enabled.
Enable/Disable – Enable/Disable the function of DHCP
Option. Each DHCP option is composed by an option
number with data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for
DHCP option will be seen in DHCP reply packets.
Interface – Choose the interface for such option.
Option Number – Type a number for such function.
DataType – Choose the type (ASCII or Hex) for the data to
be stored.
Data – Type the content of the data to be processed by the
function of DHCP option.
Force router to use DNS
server IP address …..
Force Vigor router to use DNS servers configured in
LAN1/LAN2/LAN3/LAN4/LAN5/LAN6 instead of DNS
servers given by the Internet Access server (PPPoE, PPTP,
L2TP or DHCP server).
Inter-LAN Routing
Check the box to link two or more different subnets (LAN
and LAN).
When you finish the configuration, please click OK to save and exit this page.
To Next Page
Loading...
Need help?
General
