Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
434
3
3
.
.
1
1
9
9
.
.
1
1
1
1
R
R
e
e
b
b
o
o
o
o
t
t
S
S
y
y
s
s
t
t
e
e
m
m
The Web user interface may be used to restart your router. Click Reboot System from System
Maintenance to open the following page.
Index (1-15) in Schedule Setup - You can type in four sets of time schedule for performing
system reboot. All the schedules can be set previously in Applications >> Schedule web page
and you can use the number that you have set in that web page.
If you want to reboot the router using the current configuration, check Using current
configuration and click Reboot Now. To reset the router settings to default values, check
Using factory default configuration and click Reboot Now. The router will take 5 seconds
to reboot the system.
Note: When the system pops up Reboot System web page after you configure web settings,
please click Reboot Now to reboot your router for ensuring normal operation and
preventing unexpected errors of the router in the future.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering