Vigor2860 Series User’s Guide
332
access point.
The number displayed on the left side means 2.4GHz; and the
number displayed on the right side means 5Ghz.
Version
Display the firmware version used by the access point.
Password
Vigor2860 can get related information of the access point by
accessing into the web user interface of the access point.
This button is used to modify the logging password of the
connected access point.
3
3
.
.
1
1
4
4
.
.
2
2
W
W
L
L
A
A
N
N
P
P
r
r
o
o
f
f
i
i
l
l
e
e
WLAN profile is used to apply to a selected access point. It is very convenient for the
administrator to configure the setting for access point without opening the web user interface
of the access point.
Check the box on the left side of the selected profile to modify the content of the profile. The
Clone, Edit and Apply To Device buttons will be available then.
Available settings are explained as follows:
Item Description
Profile
Display the name of the profile.
The default profile cannot be renamed.
Main SSID
Display the SSID configured by such wireless profile.
Security
Display the security mode selected by such wireless profile.
Multi-SSID
Enable means multiple SSIDs (more than one) are active.
Disable means only SSID1 is active.
To Next Page
Loading...
Need help?
General
