Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
274
3
3
.
.
1
1
0
0
.
.
7
7
I
I
G
G
M
M
P
P
IGMP is the abbreviation of Internet Group Management Protocol. It is a communication
protocol which is mainly used for managing the membership of Internet Protocol multicast
groups.
Available settings are explained as follows:
Item Description
Enable IGMP Proxy
Check this box to enable this function. The application of
multicast will be executed through WAN/PVC/VLAN port.
In addition, such function is available in NAT mode.
Enable IGMP Snooping
Check this box to enable this function. Multicast traffic will
be forwarded to ports that have members of that group.
Disabling IGMP snooping will make multicast traffic
treated in the same manner as broadcast traffic.
Refresh
Click this link to renew the working multicast group status.
Group ID
This field displays the ID port for the multicast group. The
available range for IGMP starts from 224.0.0.0 to
239.255.255.254.
P1 to P6
It indicates the LAN port used for the multicast group.
After finishing all the settings here, please click OK to save the configuration.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering