Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
225
To set a new profile, please do the steps listed below:
1. Click the Mail Server tab, and click the number (e.g., #1) under Index column for
configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name
Type a name for such mail service profile. The maximum
length of the name you can set is 31 characters.
SMTP Server
Type the IP address of the mail server. The maximum
length of the name you can set is 63 characters.
SMTP Port
Type the port number for SMTP server.
Sender Address
Type the e-mail address of the sender.
Use SSL
Check this box to use port 465 for SMTP server for some
e-mail server uses https as the transmission method.
Authentication
The mail server must be authenticated with the correct
username and password to have the right of sending
message out. Check the box to enable the function.
Username – Type a name for authentication. The

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering