Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
10
LED
Off The port is connected with 10/100Mbps
Interface Description
Wireless LAN
ON/OFF/WPS
Press "Wireless LAN ON/OFF/WPS" button once to wait for
client device making network connection through WPS.
Press "Wireless LAN ON/OFF/WPS" button twice to enable
(WLAN LED on) or disable (WLAN LED off) wireless
connection.
Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED
is blinking). Press the hole and keep for more than 5 seconds.
When you see the ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with the factory
default configuration.
USB Connecter for a USB device (for 3G USB Modem or printer).
VDSL2/ADSL Connecter for accessing the Internet.
WAN2 (Giga) Connecter for local network devices or modem for accessing
Internet.
GigaLAN (1-6) Connecters for local network devices.
Phone 1/2 Connecter for analog phone(s).
Line Connector for PSTN life line.
PWR
Connecter for a power adapter.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering