Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
240
Available settings are explained as follows:
Item Description
Activate
Click it to access into MyVigor for activating WCF service.
Setup Query Server
It is recommended for you to use the default setting,
auto-selected. You need to specify a server for categorize
searching when you type URL in browser based on the web
content filter profile.
Setup Test Server
It is recommended for you to use the default setting,
auto-selected.
Find more
Click it to open http://myvigor.draytek.com for searching
another qualified and suitable server.
Test a site to verify
whether it is categorized
Click this link to do the verification.
Set to Factory Default
Click this link to retrieve the factory settings.
Default Message
You can type the message manually for your necessity or
click this button to get the default message which will be
displayed on the field of Administration Message.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering