Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
268
After finished the above settings, click OK button to save the settings.
T
T
A
A
C
C
A
A
C
C
S
S
+
+
It means Terminal Access Controller Access-Control System Plus. It works like RADIUS
does. Click the TACACS+ Setup to open the following page:
Available settings are explained as follows:
Item Description
Enable
Check to enable TACACS+ feature.
Server IP Address
Enter the IP address of TACACS+ server.
Destination Port
The UDP port number that the TACACS+ server is using.
Shared Secret
The TACACS+ server and client share a secret that is used
to authenticate the messages sent between them. Both sides
must be configured to use the same shared secret.
Confirm Shared Secret
Re-type the Shared Secret for confirmation.
After finished the above settings, click OK button to save the settings.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering