Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
271
Available settings are explained as follows:
Item Description
Name
Type a name for such profile. The length of the use name is
limited to 19 characters.
Common Name
Identifier
Type or edit the common name identifier for the LDAP server.
The common name identifier for most LDAP server is “cn”.
Additional Filter
Type the condition for additional filter.
Base Distinguished
Name / Group
Distinguished Name
Type or edit the distinguished name used to look up entries on
the LDAP server.
Sometimes, you may forget the Distinguished Name since it’s
too long. Then you may click the
button to list all the
account information on the AD/LDAP Server to assist you
finish the setup.
After finished the above settings, click OK to save and exit this page. A new profile has been
created.
For detailed information about LDAP application, refer to section 4.7 How to Implement the
AD/LDAP Authentication for User Management?

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering