Vigor2860 Series User’s Guide
286
Index
Click the number below Index to access into the setting
page of IPsec Peer Identity.
Name
Display the profile name of that index.
Click each index to edit one peer digital certificate. There are three security levels of digital
signature authentication: Fill each necessary field to authenticate the remote peer. The
following explanation will guide you to fill all the necessary fields.
Available settings are explained as follows:
Item Description
Profile Name
Type the name of the profile. The maximum length of the
name you can set is 32 characters.
Enable this account
Check it to enable such account profile.
Accept Any Peer ID
Click to accept any peer regardless of its identity.
Accept Subject
Alternative Name
Click to check one specific field of digital signature to
accept the peer with matching value. The field can be IP
Address, Domain, or E-mail Address. The box under the
Type will appear according to the type you select and ask
you to fill in corresponding setting.
Accept Subject Name
Click to check the specific fields of digital signature to
accept the peer with matching value. The field includes
Country (C), State (ST), Location (L), Organization (O),
Organization Unit (OU), Common Name (CN), and
Email (E).
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
