Vigor2860 Series User’s Guide
355
Click any index number to display the dial plan setup page.
Available settings are explained as follows:
Item Description
Enable
Check it to enable this entry.
Call Direction
Determine the direction for the phone call, IN – incoming
call, OUT-outgoing call, IN & OUT – both incoming and
outgoing calls.
Barring Type
Determine the type of the VoIP phone call, URI/URL or
number.
Specific URI/URL or
Specific Number
This field will be changed based on the type you selected
for barring Type.
Route
All means all the phone calls will be blocked with such
mechanism.
Index (1-15) in Schedule
Enter the index of schedule profiles to control the call
barring according to the preconfigured schedules. Refer to
section Applications>>Schedule for detailed
configuration.
Additionally, you can set advanced settings for call barring such as Block Anonymous, Block
Unknown Domain or Block IP Address. Simply click the relational links to open the web
page.
For Block Anonymous – this function can block the incoming calls without caller ID on the
interface (Phone port) specified in the following window. Such control also can be done based
on preconfigured schedules.
To Next Page
Loading...
Need help?
General
