Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
470
4. Now navigate to the next section, Dial-In Settings to check PPTP, IPsec Tunnel and
L2TP boxes. Check the box of Specify Remote… and type the Peer VPN Server IP
(e.g., 218.242.130.19 in this case). Press the IKE Pre-Shared Key button to set the PSK;
and select Medium (AH) or High (ESP) as the security method.
5. Continue to navigate to the TCP/IP Network Settings for setting the LAN IP for remote
side.
6. Click OK to save the settings.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering