Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
597
-D<addr>
It means to set the second DNS IPv6 address.
-c<parameter>
It means to send rapid commit to server.
1: Enable
0: Disable
-e<parameter>
It means to enable or disable the DHCPv6 server.
1: Enable
0: Disable
E
E
x
x
a
a
m
m
p
p
l
l
e
e
> ip6 dhcp server -d FF02::1
> ip6 dhcp server -i ff02::1
> ip6 dhcp server -x ff02::3
> ip6 dhcp server -a
% Interface LAN has following DHCPv6 server settings:
% DHCPv6 server disabled
% maximum address of the pool: FF02::3
% minimum address of the pool: FF02::1
% 1st DNS IPv6 Addr: FF02::1

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering