Draytek Vigor2860 Series User Manual

Vigor2860 Series User’s Guide
82
Physical Mode / Type
Display the physical mode and physical type of such WAN
interface.
Line Speed(Kbps)
DownLink/UpLink
Display the downstream and upstream rate of such WAN
interface.
Active Mode
Display whether such WAN interface is Active device or
backup device.
Backup (WAN#)- Display the backup WAN interface for
such WAN when it is disabled.
Note: In default, each WAN port is enabled.
After finished the above settings, click OK to save the settings.
W
W
A
A
N
N
1
1
w
w
i
i
t
t
h
h
A
A
D
D
S
S
L
L
/
/
V
V
D
D
S
S
L
L
Vigor router will detect the physical line is connected by ADSL or VDSL2 automatically.
Therefore, this page allows you to configure settings for ADSL and VDSL2 at one time. That
is, it is not necessary for you to configure different profile settings for ADSL and VDSL2
respectively.
Available settings are explained as follows:
Item Description
Enable
Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Display Name
Type the description for such interface.

Draytek Vigor2860 Series Specifications

General

Firewall Type	Stateful Packet Inspection (SPI)
VPN Support	IPSec, PPTP, L2TP, SSL VPN
DoS Protection	Yes
Intrusion Prevention System (IPS)	Yes
LAN Interfaces	4 x Gigabit Ethernet
User Authentication	Local, RADIUS, LDAP
VPN Tunnels	32
Management Interface	Web-based, CLI
Concurrent Sessions	50, 000
Content Filtering	URL Keyword Filtering, Web Content Filtering