Ducati 749R - Front Fork Settings and Preload; Standard Factory Settings; Setting Consistency Important

E
40
STANDARD factory setting is as follows:
compression: 10 clicks;
rebound: 12 clicks.
The adjustment ranges are as follows:
compression: 30 clicks
rebound: 28 clicks.
Max. setting for softest damping adjustment is 24 clicks
for rebound and 28 clicks for compression.
To change the preload of the spring inside each fork leg,
turn the hex. adjusting nut (2) with a 22-mm hexagon
wrench.
Factory setting is 10 mm.
Important
Adjust both fork legs to same settings.