Ducati 749R User Manual

E
78
Cleaning the motorcycle
To preserve the finish of metal parts and paintwork,
wash and clean your motorcycle at regular intervals,
anyway according to the road conditions you ride in.
Use specific products only. Prefer biodegradable products.
Avoid aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
the motorcycle is still hot, water drops will evaporate faster
and spot hot surfaces. Never clean the motorcycle using hot
or high-pressure water jets. Cleaning the motorcycle with
water cleaners may lead to seizure or severe failure of front
fork, wheel hub assembly, electric system, front fork seals,
air inlets or exhaust silencers and adversely affect the
operation of motorcycle safety features.
If needed, clean off stubborn dirt or exceeding grease from
engine parts using a degreasing agent. Be sure to avoid
contact with drive parts (chain, sprockets, etc.). Rinse with
warm water and dry all surfaces with chamois leather.
Warning
Loss of braking may occur immediately after washing
the motorcycle. Never grease or lubricate the brake discs.
Loss of braking and further accidents may occur. Clean the
discs with an oil-free solvent.

Ducati 749R Specifications

General

Bore x Stroke	94 mm x 54 mm
Transmission	6-speed
Frame	Tubular steel trellis frame
Exhaust	2-1-2 system with catalytic converter and lambda probe
Final Drive	Chain; front sprocket 15; rear sprocket 39
Front Wheel Travel	120 mm
Front Brakes	2 x 320 mm semi-floating discs, 4-piston calipers
Rear Brakes	245 mm disc, 2-piston caliper
Front Tyre	120/70 ZR17
Rear Tyre	180/55 ZR17
Engine Type	L-Twin cylinder, 4 valve per cylinder desmodromic
Power	89 kW (121 hp) @ 10, 250 rpm
Torque	84 Nm (62 lb-ft) @ 8, 500 rpm
Fuel Injection	Electronic fuel injection, 54 mm throttle bodies
Front Suspension	43 mm upside-down fork
Rear Suspension	Fully adjustable monoshock
Rear Wheel Travel	128 mm
Wheelbase	1, 420 mm
Fuel Capacity	15.5 L (including 3.5 L reserve)