DURAG D-ISC 100 P 2 User Manual

10 | Channel setup menu 4
D-ISC 100 x xx2
133
10.4.3.4 Digital output
For assembly, also refer to 4.3.6 Digital output [}56], and for the
module description see 3.4 Expansion modules [}25]. Also refer
to 15.11 Example: Assignment of digital outputs [}184] et. seq.
Assign source status
[
Assign source status]
● Assign source status: indicates (list) which source statuses
are assigned to the 8 individual channels.
● After accessing the relevant channel DOm.1…8, the assign-
ment can be removed or a selection and assignment can take
place from the current list.
Functions
[
Functions]
● Service functions: enables a device restart. Settings that have
not been saved may be lost and are no longer considered
when restarting.
● Simulation functions: allow a value (simulation value) to be
assigned and the use of the assigned value (simulation re-
quest, activate simulation) for each of the 8 channels.
Specific parameter
[
Specific parameter]
● Signal inversion: allows for the activation of the signal inver-
sion for each of the 8 channels. See also 15.11.1 Example:
Signal inversion setup (digital outputs) [}185].
Setup
[
Setup]
● General: displays and edits the customer name(a user-spe-
cific name for the respective module).
Information
[
Information]
● Displays information on the D‑ISC100 device with the cur-
rently selected module and information on the versions used.
10.4.3.5 Digital input
For assembly, also refer to 4.3.5 Digital input [}55], and for the
module description see 3.4 Expansion modules [}25]. Also refer
to 15.12 Example: Assignment of digital inputs [}187] et. seq.
Assign target function
[
Assign target function]
● Assign the target function: indicates (list) which target func-
tions are assigned to the 8 individual channels.
● After accessing the relevant channel DOm.1…8, the assign-
ment can be removed or selected from an up-to-date list di-
vided into the connected units
(D−ISC100, sensors) and then assigned.
Functions
[
Functions]
● Service functions: enables a device restart. Settings that have
not been saved may be lost and are no longer considered
when restarting.
● Simulation functions: allow a value (simulation value) to be
assigned and the use of the assigned value (simulation re-
quest, activate simulation) for each of the 8 channels.
Common parameter
[
Common parameter]

DURAG D-ISC 100 P 2 Specifications

General

Brand	DURAG
Model	D-ISC 100 P 2
Category	Control Unit
Language	English