Table of contents
Operating Manual 171/173 Version 01.0 - 01/20162
5.12 Keypad on the machine arm................................... 42
5.13 Operating the controller.......................................... 43
5.14 Sewing.................................................................... 43
5.15 Maintenance ........................................................... 45
5.15.1 Cleaning work......................................................... 45
5.16 Checking the pneumatic system............................. 46
5.16.1 Oil lubrication.......................................................... 48
5.17 Customer service.................................................... 51
6 Set-up..................................................................... 53
6.1 Checking the scope of delivery............................... 53
6.2 Removing the transport securing devices............... 54
6.3 Fitting the frame components................................. 55
6.4 Completing the table plate...................................... 56
6.5 Fastening the table plate to the frame.................... 57
6.5.1 Installing the reel stand........................................... 58
6.6 Setting the working height ...................................... 59
6.7 Fitting the machine upper section........................... 60
6.8 Fitting the controller................................................ 61
6.9 Fitting the control panel for the controller ............... 62
6.10 Fitting the pedal and setpoint device ...................... 64
6.11 Fitting the knee lever .............................................. 65
6.12 Fitting the oil return line .......................................... 66
6.13 Electrical connection............................................... 67
6.13.1 Checking the mains voltage.................................... 67
6.13.2 Connecting the controller........................................ 67
6.13.3 Establishing equipotential bonding ......................... 68
6.14 Pneumatic connection ............................................ 69
6.14.1 Fitting the maintenance unit.................................... 69
6.14.2 Setting the operating pressure................................ 70
6.15 Oil lubrication.......................................................... 70
6.16 Sewing test............................................................. 71
7 Decommissioning................................................. 73
8 Disposal................................................................. 75
9 Appendix ............................................................... 77
To Next Page
Loading...
Need help?
General
