Decommissioning
Operating manual 171/173 Version 01.0 - 01/2016 73
7 Decommissioning
A number of activities must be performed if the machine
is to be shut down for a longer period of time or completely
decommissioned.
Decommission the machine as follows:
1. Switch off the main switch.
2. Unplug the power plug.
3. Disconnect the pneumatic connection.
4. Remove residual oil from the oil pan under the sewing material
su
pport using a cloth.
5. Cover the control panel to protect it from soiling.
6. Cover the entire machine if possible
to protect it from soiling
and damage.
Observe the necessary safety precautions for transport.
Risk of injury due to a lack of care.
A lack of care or a lack of sufficient technical
knowledge when decommissioning the machine
can result in serious injuries.
ONLY clean the machine when it is switched off.
Avoid contact with oil residues.
Allow ONLY trained personnel to disconnect
the machine.
WARNING
To Next Page
Loading...
