29.6.2 Menu item manual input test
Caution: Danger of injury!
Exercise utmost caution when making the input test with the machine
running.
In this menu individual input elements can be tested.
–
Select the desired input element with the keys “ñ”or“ò”.
The current status is shown in the display:
0 = Input inactive
1 = Input active
Input Designation
S03 Multiflex
S04 Light barrier mode
S05 Light barrier mode
S09 Push button 1
S10 Push button 2
S11 Foot pedal 1
S12 Foot pedal 2
S13 Foot pedal 3
RefN Sewing motor
RefX X-axis
RefY Y-axis
RefZ Z-axis
–
Quit the input test by pressing the “ESC ”key.
98
To Next Page
Loading...
