8.5 Adjusting the locking plate
Caution: Danger of injury!
Turnthemainswitchoff.
Adjust the locking plates only with the machine switched off.
Standard checking
The locking plates 1 have to be adjusted in such a way that the
stops 3 of the clamping plates abut centrally and as tight as possible.
–
Insert the clamping plates.
–
Check the position of the locking plates 1 to the stop 3.
Correction
–
Adjust the locking plate 1 with the special spanner 2 (in the
accessories).
26
21
3
31
To Next Page
Loading...
