10.7 Cutting pressure
Standard checking
In order to keep the strain of all components as low as possible
and to increase the life of the cutting knife, the cutting pressure
can be adjusted.
Depending on the sewing material and the material thickness, the
cutting pressure should be adjusted to be as low as possible.
However, it has to be adjusted in such a way that the material is cut
safely.
The cutting pressure is associated with different cutting lengths in the
program.
Correction
–
See operating instructions chapter 10.5.4
10.8 Cutting duration
Standard checking
It is possible to set the cutting duration, to avoid an unnecessary long
cut on the material to be processed thus allowing a clean result.
Correction
–
See chapter 29.4.4
44
To Next Page
Loading...
