DURKOPP ADLER 580 - Knife Change

22.4 Knife change
The parts of the knife kit can be exchanged if necessary.
Part No.
Spring sheet 0580 350400
Knife plate 0580 350440
Knife 0580 350690
–
Loosen screws 1, 2 and 4 of the knife plate.
–
Remove the knife plate 3.
–
Loosen screw 5.
–
Remove knife 6.
–
Insert new knife 6 and tighten with screw 5.
There must be a bush on the screw 5.
The knife has to be flexibly connected to the slide.
–
Put on the new knife plate 3 and tighten with the screws 1 and 4.
–
Set the cutting pressure by the screw 2 (see chapter 22.2).
64
1
2
3
4
5
6