DURKOPP ADLER 580 - Menu Structure with Numbers

29.3.1 Menu structure with numbers
Machine config (1)
Load pos. (1.1)
Zig-zag (1.2)
Thread mon. (1.3)
E-group (1.4)
Threading mode (1.6)
Standard (1.6.1)
Parallel (1.6.2)
Operation mode (1.7)
Standard (1.7.1)
Sample (1.7.2)
Tandem (1.7.3)
Indexer (1.7.4)
Tension data (1.8)
Data 1 (1.8.1)
Data 2 (1.8.2)
Data 3 (1.8.3)
Data 4 (1.8.4)
Data 5 (1.8.5)
Data 6 (1.8.6)
Multiflex (1.9)
Mode (1.9.1)
X-Corr. L (1.9.2)
X-Corr. R (1.9.3)
Y-Corr. (1.9.4)
Block length (1.9.5)
Knife L (1.9.6)
Knife R (1.9.7)
Operat. Config (2)
Language (2.1)
German (2.2.1)
English (2.1.2)
Numbers (2.1.3)
Manual keys (2.2)
Sew. Lamp (2.3)
Key tones (2.4)
86