DURKOPP ADLER 580 - Menu Item Multiflex

29.4.9 Menu item Multiflex (Multiflex)
In this menu the built-in cutting system can be set.
The value set means :
Mono normal cutting system (2x cut)
Multi Multiflex cutting system
Mode Mono
X-correction left buttonhole
X-correction right buttonhole
Y-correction for both buttonholes
Mode Multi
X-correction left buttonhole
X-correction right buttonhole
Y-correction for both buttonholes
Block length
Knife number for left knife
Knife number for right knife
Buttonhole knife and -blocks
Part-No. Knife- Form
Number
0580 332000 31 with eye 2,8 x 4,3 x 36 mm
0580 332010 21 with eye 2,1 x 3,2 x 36 mm
0580 332020 02 Mid cut without eye 8 mm
0580 332030 33 only eye 2,8 x 4,3 mm
0580 332040 23 only eye 2,1 x 3,2 mm
0580 332050 01 without eye 36 mm
0580 332060 32 Mid cut with eye 2,8 x 4,3 x 8 mm
0580 332070 22 Mid cut with eye 2,1 x 3,2 x 8 mm
0580 332100 82 Eyelet ø 1,0 mm
0580 332110 83 Eyelet ø 1,5 mm
0580 332120 84 Eyelet ø 2,0 mm
0580 332130 86 Eyelet ø 3,0 mm
0580 332140 88 Eyelet ø 4,0 mm
0580 332200 Cutting block 17 mm
0580 332270 Cutting block 10 mm
0580 332360 Cutting block 26 mm
93
3