DURKOPP ADLER 580 - Menu Item Tension Data

29.4.8 Menu item tension data (Tension data)
In this menu the characteristic values for the magnets of the needle
thread tension can be set.
Attention !
Only change the characteristic values of the magnets, when
mounting new magnet.
When ordering new magnet, the corresponding values
are enclosed with.
Changing the characteristic values
–
Press the “F” key.
–
Select the menu “Machine config.”.
–
Select the menu “Tension data”.
–
Enter the code.
–
Enter value from 1 to
6.
92