98 E-MU Systems
MIDI Menu
MIDI Mode
The Enter LED will be flashing. Press the Enter button to confirm the
operation. To receive MIDI data, simply send the MIDI data into MK-6 from
another MK-6 or from a computer/sequencer.
To Record MIDI SysEx Data into an External Sequencer:
1. Setup the sequencer to receive system exclusive data.
2. Place the sequencer into record mode, then Send MIDI Data.
To Receive MIDI SysEx Data from an External Sequencer:
Simply play back the sequence containing the SysEx data into MK-6.
MIDI Mode MIDI Mode selects one of the three MIDI modes: Omni, Poly or Multi.
The MIDI Mode Change parameter specifies whether mode changes made
through an external MIDI controller are accepted or ignored.
The MIDI modes are as follows:
Omni
Responds to note information on all MIDI channels and plays the preset
currently displayed in the main screen.
Poly
Responds only to note information received on the currently selected MIDI
channel (on the preset selection screen) and plays that channel’s associated
preset.
Multi
Responds to data on any combination of MIDI channels and plays the
specific preset associated with each of the MIDI channels. You must select
multi mode for multitimbral operation.
SEND MIDI SYSEX DATA
bank 1 user presets
MIDI MODE CHANGE
multi ignored
To Next Page
Loading...
General