84 E-MU Systems
Global Menu
Defining Global Parameters
Defining
Global
Parameters
Global setup parameters affect overall performance, range, and global
effects. This section describes the Global parameters and how to define
them.
Master Transpose/
Tune
The Transpose parameter transposes the key of all presets, in semitone
intervals. The transpose range is ± 24 semitones.
Master Tune adjusts the fine tuning of all presets so that you can tune MK-6
to other instruments. The master tuning range is ± 1 semitone in 1/64th
semitone increments (1.56 cents). A master tune setting of “+00” indicates
that MK-6 is perfectly tuned to concert pitch (A=440 Hz).
Master Bend Range The Master Bend Range parameter sets the range of the pitch wheel. This
affects only presets that have their individual Pitch Bend range (defined in
the Preset Edit menu) set to Master. See page 160. The maximum pitch bend
range is ±12 semitones or one octave in each direction.
MASTER TRANSPOSE TUNE
+00 semitones +00
MASTER BEND RANGE
+/- 7 semitones
To Next Page
Loading...
General