MK-6 Operation Manual 35
Basic Operations
Screen View Buttons
Demo Mode Pressing the Main and Mix buttons simultaneously calls up the Demo
Sequence page. MK-6 has several factory demonstration sequences that let
you hear what this incredible machine can do. The actual number of demo
sequences depends on which ROM sounds sets are installed.
To Play a Demo Sequence:
1. Press and hold the Main and Mix buttons at the same time to enter the
Demo Sequence page. The screen shown above appears.
2. Select a sequence using the data entry control. The Enter LED will be
flashing.
3. Press the Enter button to begin playing the selected sequence. The
following screen appears.
4. Press the Enter button again to stop playing the sequence.
5. When a demo sequence plays to the end, the next demo will automati-
cally begin playing. The screen will display the new demo name.
6. With the sequence stopped, press any other button to Exit demo
sequence mode.
PANS Chan: 01 Vol: 127
right
left
DEMO SEQUENCES MROM1
Arctic Drift
PLAYING: UNCANNY 1
Press ENTER to stop
To Next Page
Loading...
General