178 E-MU Systems
Effects
Master Effects
9. Set the other effect parameters to your preference. Refer to the infor-
mation in the last section for detailed descriptions of these parameters.
10. Save the preset. The programmed effects setting will be saved along
with the preset.
Master Effects When playing single presets, the effects are normally programmed as part
of the preset. In Multimode the Master effects are used, since there are only
two effect processors to serve 16 MIDI channels.
You might also want the effects to be programmed on a global basis when
in Omni or Poly modes. You could choose your favorite reverb, for
example, and have it applied to any preset you select.
To Program the Master Effects
1. Press the Global menu button. The LED illuminates and the Global
screen appears.
2. Use the data entry control to select the FXA Algorithm screen.
3. Select an Effect.
4. Use the data entry control to select the FXA parameter screen.
The FxB -> FxA parameter lets you route the B effect through the A effect.
See “Effect B Into Effect A” on page 182.
FXB FEEDBK LFORATE DELAY
127 127 635ms
FXA ALGORITHM
Lg Concert Pan
FXA DECAY HFDAMP FxB>FxA
90 127 127
To Next Page
Loading...
General