MK-6 Operation Manual 13
Setup
This section thoroughly describes how to set up your new MK-6 for use.
Setup includes unpacking instructions, how to hook up the unit to your
sound system and, most importantly, how to turn the thing on and off.
Unpacking Carefully remove MK-6 from the packaging material. Take care to save the
packing materials in case you need to transport the unit. Check to make
sure all components are included and in good condition. If there are
missing or damaged components, contact E-MU Systems immediately for
replacement or repair.
The MK-6 box should include the following components:
• MK-6 unit
• Power cable
• This operation manual
To Next Page
Loading...