MK-6 Operation Manual 245
Appendix
MIDI
113
114
115
116
117
118
119
120 All Sound Off No Yes See note
121 Reset All Contlrs No Yes
122 Local Cntrl on/off No No
123 All Notes Off No Yes
124 Omni Mode Off No Yes
if enabled
125 Omni Mode On No Yes
if enabled
126 Poly Mode Off No Yes
if enabled
127 Poly Mode On No Yes
if enabled
NOTES: * MK-6 can transmit and receive ANY continuous controller number
from 1 to 95. Because of MK-6’s powerful synth engine, many of
the standard MIDI controllers can be user programmed to provide
the desired function. A “Yes” response in this chart means that a
controller is programmed by default in MK-6.
Controller 79 is hard-coded to the Mix Output parameter.
0=Use Preset, 1=Send 1, 2=Send 2, 3=Send 3, 4=Send 4
Controller 80 is hard-coded to the Arp Status parameter.
0=Off, 1=On, 2=P (preset), 3=M (master)
Value of 0 = reset all except vol & pan; value of 127 = reset all
Other: Pan: -64 = hard left, +63 = hard right
Control # Function Transmitted Recognized Remarks
To Next Page
Loading...
General