Eaton 93E MK2 - Table 3-3. UPS Cabinet Clearances; Table 3-4. Air Conditioning or Ventilation Requirements During Full Load Operation

UPS Installation Plan and Unpacking
T able 3-3. 93E MK2 Required Clearances
93E MK2 Required Clearance for paralleled adjacent UPS or UPS and adjacent PDU
Ambient L1(mm) L2(mm)
25
o
C
30
o
C
35
o
C
40
o
C
Notes:
≥600 ≤50
• L1- clearance to the rear w all.
• L2-
clearance between the adjacent paralleled UPS or UPS and adjacent PDU. Parallel UPS should be as close
as
possible.
•
Some models that feature rear connections also require additional rear clearance to enable installation and
connection.
CAUTION
If battery systems are located in the same room as the UPS, the battery manuf act urer's
environmental requirements should be followed if they are more stringent than the UPS
requirements. Operating temperatures above the recommended range will result in decreased
battery life and performance, and may reduce or void the battery w ar rant y .
The UPS ventilation
requirements are shown in Table 3-4.
T able 3-4. Air Conditioning or V entilation Requirements During Full Load Operation
Model Power Rating Input / Output V oltage
Heat Dissipation (KC/H)
93E MK2-10I-9AH-MBS
10 kVA 380/380 400/400 415/415 523
93E MK2-10I-9AH-MBS
15 kVA 380/380 400/400 415/415 862
93E MK2-10I-9AH-MBS
20 kVA 380/380 400/400 415/415 1149
93E MK2-10I-9AH-MBS
30 kVA 380/380 400/400 415/415 1723
93E MK2-10I-9AH-MBS
40 kVA 380/380 400/400 415/415 2298
9
Eaton 93E MK2 UPS (10-40kVA, 380/400/415V) Installation and Operation