Eaton 93E MK2 - PERIODIC Maintenance; ANNUAL Maintenance; BATTERY Maintenance; Figure 8-1. Air Filter Location

Filters
Figure 8-1. Air Filter Location
8.2.3
PERIODIC Maintenance
Periodic inspections of the UPS should be made to determine if components, wiring, and connections e xhibit
evidence of overheating. Particular attention should be given to the compression lug connections. Maintenance
procedures should specify that the compression lug connections be re-torqued to values listed in this manual.
8.2.4 ANNUAL Maintenance
Annual preventive maintenance should be performed only by authorized service personnel familiar with
maintenance and servicing of the UPS system. Contact an Eaton service representative for more inf ormation about
service of f erings.
8.2.5 BATTERY Maintenance
Contact an Eaton service representative for battery maintenance. Battery replacement and maintenance should
be
performed only by authorized service personnel.
79
Eaton 93E MK2 UPS (10-40kVA, 380/400/415V) Installation and Operation