Eaton 93E MK2 - Figure 4-7. Interface Terminal Detail (Terminal Cover Removed); Figure 4-8. Building Alarm Terminal Block Connector Assignments; Table 4-1. Building Alarm Connections

Figure 4-7. Interface Terminal Detail (Terminal Cover Removed)
Figure 4-8. Building Alarm Terminal Block Connector Assignments
T able 4-1. Building Alarm Connections
Building Alarm Terminal Name Description
1
Building Alarm 1 +
2
Building Alarm 1 –
3
Building Alarm 2 +
4
Building Alarm 2 –
5
Building Alarm 3 +
6
Building Alarm 3 –
Input: Programmable UPS alarm, activated by a remote dry contact closure.
Input: Programmable UPS alarm, activated by a remote dry contact closure.
Input: Programmable UPS alarm, activated by a remote dry contact closure.
Mini-Slot Communication Bay 1
Mini-Slot Communication Bay 2
Buildin
g
Alarm
(
See Fi
g
ure 4-8 for Details
)
REPO Terminals (See Figure 4-13 for Details)
Pull chain Terminals
Parallel CAN In
p
ut
(
RJ45
)
Parallel CAN Out
p
ut
(
RJ45
)
Building Alarm 1
Building Alarm 2
Building Alarm 3
29
Eaton 93E MK2 UPS (10-40kVA, 380/400/415V) Installation and Operation