Eaton 93E MK2 User Manual

Eaton 93E UPS 15-80 kVA (380/400/415 V) Installation and Operation Manual
© Eaton Corporation plc 2015. All rights reserved. Revision: 001
Document ID: 614-01975-00
94 (133)
Function
Sub-function
Operation
Function
Selection
This screen can be used to set the date and
time, change the display language, enter a
unit name, change the meter style, perform
a lamp test, clear the history log, and enter a
password to access level 1 functions. Use
the or push buttons to select the
SETUP
symbol in the main menu bar to
display the Setup screen. Use the or
push button to select
CONFIG
on the Setup
menu bar. Enter a password, if required.
Clock
The Clock screen allows the selection of
either month/day/year or day/month/year
formats and daylight savings time for display
on the screen and for logging events in the
Event and History Logs. Use the or
push button to select
CLOCK
to display the
Clock screen. Use the or push button
to highlight the desired format, then press
the push button to display the Set Date
and Time screen. To return to the System
Setup screen, press the
ESC
push button.
Setup –
Config
(System
Level 1
Setup)
(continued)
Set Date and
Time
MM/DD/YYYY
The Set Date and Time MM/DD/YYYY
screen allows the internal date and time of
the UPS to be set in the month/day/year
format. The date and time information is
used for display on the screen and for
logging events in the Event and History
Logs. Use the or push button to
highlight the setting to be changed. Use the
or push button to make the change.
When finished making changes, use the
or push button to highlight
SAVE
and the
or push button to select
YES
. To
complete the save function and return to the
System Setup screen, press the push
button.

Eaton 93E MK2 Specifications

General

Brand	Eaton
Model	93E MK2
Category	UPS
Language	English