Serinus 40 User Manual 2.2
Manufacturer’s Statement
Thank you for selecting the Ecotech Serinus 40 Oxides of Nitrogen Analyser.
The Serinus series is the next generation of Ecotech designed and manufactured gas analysers. The
Serinus 40 will perform oxides of nitrogen measurements over a range of 0-20ppm with a lower
detectable limit of 0.4 ppb.
This User Manual provides a complete product description including operating instructions,
calibration, and maintenance requirements for the Serinus 40.
Reference should also be made to the relevant local standards which should be used in conjunction
with this manual. Some relevant standards are listed in the references section of this manual.
If, after reading this manual you have any questions or you are still unsure or unclear on any part of
the Serinus 40 then please do not hesitate to contact Ecotech or your local Ecotech distributor.
Please help the environment and recycle the pages of this manual when you have finished
using it.
Notice
The information contained in this manual is subject to change without notice. Ecotech reserves the
right to make changes to equipment construction, design, specifications and /or procedures without
notice.
Copyright © 2013. All rights reserved. Reproduction of this manual, in any form, is prohibited
without the written consent of Ecotech Pty Ltd.
CAUTION
Hazardous voltages exist within the analyser. The analyser lid should be closed
when the analyser is left unattended or turned on. Ensure the power cable,
plugs and sockets are maintained in a safe working condition.
To Next Page
Loading...
Need help?
General
