Serinus 40 User Manual 2.2
4.6.4 Real-time Plot
Allows user to view real-time plotting of up to four parameters at the same time. The user can also
scroll from left to right, top to bottom, or zoom in and out on the plot by swiping/pinching.
Once the plot is zoomed or scrolled, it enters into Observer Mode, meaning that auto-scaling is
suspended. Press at the top of the screen (where it says Observer Mode) to return to Normal Mode.
Figure 34 – Real-time plot
Options Menu
The Options Menu is accessed by the grey button in the top right corner of the screen or pressing
the Menu button, depending on your Android device.
Restarts graphing if it has been stopped and returns the graph to Normal Mode.
Stops collecting data. In this mode you can scroll the display without going into
Observer Mode, due to the system having no data collection to suspend. It is
necessary to “Stop” data collection to set the interval.
Clears the window and restarts the graphing.
Saves an image of the graph and accompanying data in the location specified in
preferences (refer to Section 4.6.7). The user will also be asked whether they want
to send the file and data via email. When saving the data, you can choose to Save
All Data or Customise the length of the data by entering a time between 5
minutes and 6 hours. Only the data from the start of collection to that limit will be
saved (although the plot will still appear exactly as it does on the screen).
While data collection is stopped, the user can specify the time intervals between
collections.
To Next Page
Loading...
