CE Mark Declaration of Conformity
This declaration applies to the Serinus 40 Oxides of Nitrogen Analyser as manufactured by Ecotech
Pty. Ltd. of 1492 Ferntree Gully Rd, Knoxfield, VIC, 3180, Australia. The instrument to which this
declaration relates is in conformity with the following European Union Directives:
Council Directive of 15 December 2004 on the approximation of the laws of Member States
relating to electromagnetic compatibility (2004/108/EC)
The following standard was applied:
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 1: General requirements.
Immunity Requirements EN 61326-1
IEC-61000-4-2 Electrostatic discharge immunity
IEC-61000-4-3 Radiated RF immunity
IEC-61000-4-4 Electrical fast transient burst immunity
IEC-61000-4-5 Surge immunity
IEC-61000-4-6 Conducted RF immunity
IEC-61000-4-11 Voltage dips and interruption immunity
Electromagnetic Compatibility EN 61326-1
CISPR-11 Radiated RF emission measurements
CISPR-11 Mains terminal RF emission measurements
IEC-61000-3-3 Mains terminal voltage fluctuation measurements
IEC-61000-3-2 Power frequency harmonic measurements
Council Directive of 12 December 2006 on the harmonization of the laws of Member States relating
to electrical equipment designed for use within certain voltage limits (2006/95/EC)
The following standard was applied:
EN 61010-1:2001 Safety requirements for electrical equipment, for measurement control
and laboratory use – Part 1: General requirements
For protection against:
Electric shock or burn
Mechanical HAZARDS
Excessive temperature
Spread of fire from the equipment
Effects of radiation, including laser sources and sonic and ultrasonic pressure
To Next Page
Loading...
